No RSS feed added
Content A- x1 Wifi Camera ESP32-CAM BluetoothB- x3 mini servos SG90C- x2 18650 rechargeable lithium batteries 6800mahD- x2 18650 battery holder with cablesE- x1 Arduino nanoF- x1 Shield nanoG- Various Cable Kit with H / H ConnectorsH- x1 Nano and shield support housingI- x1 Camera support housingJ- Initial Firmware
Content A- x1 ESP32-CAM Wifi CameraB- x4 mini servos SG90C- x2 Batteries 18650 lithium 6800mahD- x2 18650 battery holder with cablesE- x1 Arduino nano and shieldG- Various Cable Kit with H / H ConnectorsH- Variable circuit power supplyI- x1 Support housing for nano / shieldJ- x1 Camera support housingK- Initial Firmware / APP control AndroidL- Robotic...
Dimensions (L x W x H) = 22.0 x 11.5 x 27 mm (0.86 x 0.45 x 1.0 inches)Weight: 9 gramsWeight with cable and connector: 10.6 gramsTorque at 4.8 volts: 16.7 oz / in or 1.2 kg / cmOperating voltage: 4.0 to 7.2 voltsTurn speed at 4.8 volts: 0.12 sec / 60ºUniversal connector for most radio control receiversCompatible with cards like Arduino and...
5 volt powerSimple interface: Only 4 wires Vcc, Trigger, Echo, GNDMeasuring range: 2 cm to 400 cmSupply current: 15 mAPulse Rate: 40 KhzOpening of the ultrasonic pulse: 15ºTrigger signal: 10uSModule dimensions: 45x20x15 mm.
featuresGRBL 0.8c compatible. (Open source firmware that runs on an Arduino UNO and converts G-code commands into signals for PAP engines https://github.com/grbl/grbl) Supports 4 axes (X, Y, Z, A) 2 End stops for each Axis (6 in total) Comptible with A4988, DRV8825 and other drivers Jumpers for Micro-Stepping selection Compact design Power supply from 12...
Expansion Shield with Terminals for Arduino NanoTechnical characteristics:• Expansion Card For Arduino NANO 3.0.• PCB dimension: 54mm x 42mm x 1mm.• PCB thickness: 16mm.• Material: FR-4 high quality fiberglass PCB.
Specifications Module properties: non-isolated step-up & down module (BOOST & Buck)Input voltage: 5-32VOutput voltage: (1) continuously adjustable (1.3-35 V)Output current: 1.5A (max.)Input current: 4A (max.)Output power: natural cooling 20 W, plus heat sink 25 W (max.)
Technical Parameters: Size: 56 * 21 * 11mmColor: red, yellow greenLED: 5mm * 3Brightness: Normal brightnessVoltage: 5VInput: Digital signal outputInterface: common cathode red yellow-green control