|
Specifications
|
|
Standards
|
IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u, IEEE 802.3af (PoE), 802.1p (QoS priority), 802.1q (VLAN), 802.1X (security authentication), 802.11i ready (security WPA2), 802.11e ready (wireless QoS), 802.11F (wireless roaming)
|
|
Ports
|
10BASE-T/100BASE-TX Ethernet, 12V DC power
|
|
Buttons
|
Reset
|
|
Cabling type
|
Unshielded twisted pair (UTP) Category 5
|
|
LEDs
|
Power, PoE, Wireless, Ethernet
|
|
Operating system
|
Linux
|
|
Setup/Configuration
|
|
Web user interface
|
Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
|
|
Management
|
|
SNMP version
|
SNMP version 1, 2c, 3
|
|
Event logging
|
• Email notification
• Remote syslog
|
|
Web firmware upgrade
|
Firmware upgradable through web browser
|
|
Diagnostics
|
Flash, RAM, LAN, WLAN
|
|
Dynamic Host Configuration Protocol (DHCP)
|
DHCP client
|
|
Operating Modes
|
|
Access point
|
Access point mode, point-to-point bridge mode, point-to-multipoint bridge mode, repeater mode
|
|
Wireless
|
|
Spec/modulation
|
Radio and modulation type: 802.11b/DSSS, 802.11g/OFDM
|
|
Channels
|
Operating channels: 11 North America, 13 most of Europe (ETSI and Japan)
|
|
External antennas
|
2 (omnidirectional) SMA detachable
|
|
Transmit power
|
Transmit power (adjustable) at normal temperature range:
• 802.11b: 18~19 dBm
• 802.11g: 14~15 dBm
|
|
Antenna gain in dBi
|
2
|
|
Receiver sensitivity
|
802.11.g: 54 Mbps at -72 dBm, 802.11.b: 11 Mbps at -85 dBm
|
|
Security
|
|
WEP/WPA/WPA2
|
WEP 64-bit/128-bit, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2-ENT
|
|
Access control
|
Wireless connection control: MAC-based
|
|
SSID broadcast
|
SSID broadcast enable/disable
|
|
802.1X
|
IEEE 802.1X support
|
|
Wireless client isolation
|
Wireless client devices can be isolated from each other either within an SSID or between 2 SSIDs
|
|
Wireless Security Monitor
|
Scan and classify wireless devices in the network
Report new client and access point joining network and suspicious network events (works together with Cisco WUSB 200, WMP200 or WPC200 business client adapters):
• Intrusion alarms (e.g., rogue client detected, spoofed MAC address)
• Denial-of-service alarms (e.g., duration attack, association table full)
• Vulnerability alarms (e.g., access point is not using encryption, access point is broadcasting SSID)
• Other alarms (e.g., low speed connection)
|
|
Quality of Service
|
|
QoS
|
• 4 queues
• Wi-Fi Multimedia (WMM) wireless priority
|
|
General
|
|
• Wireless roaming based on IAPP
• Auto-channel selection
|
|
Environmental
|
|
Dimensions
W x H x D
|
6.69 x 8.07 x 7.68 in.
(170 x 205 x 195 mm)
|
|
Unit weight
|
0.88 lb (0.4 kg)
|
|
Power
|
12V 1A DC Input, and IEEE 802.3af compliant PoE
Maximum power draw: 3.36W
|
|
Certification
|
FCC, ICES-003, CE
|
|
Operating temperature
|
32º to 104ºF (0º to 40ºC)
|
|
Storage temperature
|
-4º to 158ºF (20º to 70ºC)
|
|
Operating humidity
|
10% to 85% noncondensing
|
|
Storage humidity
|
5% to 90% noncondensing
|
|
Package Contents
|
|
• Cisco WAP200 Wireless-G Access Point
• 2 SMA detachable dipole antennas
• User guide on CD-ROM
• Ethernet network cable
• Power adapter
• Product stands
• Registration card
|
|
Minimum Requirements
|
|
• 802.11b, 802.11g wireless adapter with TCP/IP installed per PC
• Switch/router with PoE support or PoE injector when used with PoE
• Web-based configuration: Java-enabled web browser
|
| |
